Inspired by coastal landscapes, Monterey boasts a timeless textured stripe design that adds depth and character to any room. The fabric is classified as a sheer / voile to allow daylight to diffuse your room. The fabric is availbale in 3 neutral colour-ways to co-ordinate with your interiors. It is a wide width fabric so an ideal choice for large windows.
Please note: due to variations in screen settings, prior to ordering your blind, we recommend requesting a fabric sample to ensure the perfect colour match for your home. Please click on the ‘Fabric Swatches’ tab to order your samples.
We offer two different No Drill roller blind solutions and these are detailed below. Please review the features and benefits of each system and then select the system you would like as part of the ordering process.
In summary – Grip Fit has an integrated fascia to conceal the roller blind, it comes with a ball chain as standard and can be motorised with a maximum width of 3m. Twist & Fit comes as a basic roller blind and can only be chain operated with a maximum width of 2.4m. Please note: if you are have selected a blackout fabric, then both of the no drill blind systems will result in a larger light gap at either side of the roller blind fabric, vs the standard roller blind bracket system.
Grip Fit™ is a new system to install your blinds without using a drill, meaning no holes or mess!
Grip Fit™ is the ideal solution in the home, office or rented accommodation where you can’t drill into the windows… or indeed just about any recessed window! The system works using a specially developed compound and a clever bracket system to push out on the side walls of your window recess.
The system is suitable for window widths up to 3m.
Grip Fit Roller Blinds only take seconds to fit and require no tools.
No drill holes or screws required for a quick, no mess installation.
Leaves no damage to the window recess or walls.
Ideal for the home, office or rented accommodation.
Grip Fit can be used for both motorised and chain operated roller blinds.
Maximum width 3m.
Grip Fit has an integrated fascia to conceal the roller blind.
Fascia available in white, anthracite grey and black.
Or the Fascia can be supplied to coordinate with your blind fabric.
Twist & Fit Roller Blinds are a simple solution for a basic no drill installation.
This system is suitable for window widths up to 2.4m.
Twist & Fit roller blinds only take seconds to fit and require no tools.
No drill holes or screws required for a quick, no mess installation.
Leaves no damage to the window recess or walls.
Ideal for the home, office or rented accommodation.
Twist & Fit blinds can only be used with a chain operated system.
Maximum width 2.4m
Basic no drill solution.
Twist & Fit system – Showing the sprung end and locking system
Control End with ball chain
Twist & Fit End with locking system
Ordering a Roller Blind from The Home Of Interiors
At The Home Of Interiors we want to make ordering your No Drill, Made to Measure Roller Blind as easy as possible. As you configure your blind, options will appear relative to your selections. Please refer to the tabs above for further information, diagrams, images, videos and advice on the options available to ensure your roller blind is truly bespoke and fully meets your requirements.
Upgrade your Grip Fit system to Somfy Motorised (motorisation not available for Twist & Fit)
As a Somfy accredited retailer, we can offer the full range of Somfy motors.
Battery Operated – using the very latest battery and motor technology we can supply blinds that will operate for up to 12 months on a single battery charge.
Home Automation Integration – with just a couple of basic questions, we will be able to specify the correct motor solutions for your home automation project, so whether it’s wireless, low voltage or a mains switching system, we can find the correct motor for your blinds.
If you have any questions or need any advice please call our sales team on 01590 615775 (option 1) or email sales@thehomeofinteriors.co.uk
Please note our bespoke blinds are all made to measure and cannot be returned or exchanged unless faulty.
Where possible we have sourced our hardware and fabrics from UK manufacturers and UK businesses. We are proud to be working with Louvolite for the vast majority of our hardware components. Louvolite prides itself on manufacturing its own roller blind hardware in the UK. Their systems, designed and produced domestically, are known for high quality and durability, undergoing a 10 year lifecycle test. This ensures smooth operation and longevity for your blinds. From the brackets to the chain mechanisms, Louvolite offers a complete roller blind solution made in Britain. You can read their full story by clicking here.
CHECKING YOUR WINDOWS ARE COMPATIBLE WITH NO DRILL BLINDS
Is your recess solid?
As the bracket system pushes out with up to 60kg of force, your recess needs to be solid. We have tested a whole host of substrates including brick, tile, plaster board and wood which are all suitable. However, if your recess will move when pushed, for example if you have a plasterboard wall with nothing behind it, then your window won’t be suitable for Grip Fit™.
Is your recess deep enough for the Grip Fit Cassette?
The cassette is a total of 80mm deep, so your recess must be at least this deep to house the product.
Are your walls parallel?
The No Drill roller blinds grip onto the side of your recess. As a result of this your walls need to be parallel to each other and not taper forward or back where you are going to install the blind as this would stop the rubber system from making contact with the wall fully.
HOW TO MEASURE FOR NO DRILL BLINDS
It is important to use a steel tape measure as fabric tapes can stretch over time. We recommend using the specially designer Gatortape made for measuring within window recesses (see here).
Measure the depth of your recess. It needs to be at least 8cm deep to accommodate the Grip Fit™ cassette.
Check the walls are solid by pushing on them with your hand. If the walls don’t move or bend when you push, then they are suitable.
Measure the width of your recess at the top of the window. It is important to measure to the nearest mm.
Measure the drop of the window in three places and note down the longest drop.
FITTING GRIP FIT
Once you have opened your blind, simply raise the cassette into your recess at an angle, level it out and fold the bracket levers down to lock in place. Now you can insert the blind into the cassette idle end first, slide out the bracket covers and operate your blind. The system works using a specially developed rubber compound and a clever bracket system to push out on your recess.
Fine tuning by adjusting the plus and minus blocks
Adjusting the ball chain
FITTING TWIST & FIT
Simply raise the blind into the window recess then twist the locking system firmly into place to secure the blind.
For general guidance on providing measurements for a roller blind, please refer to our measuring guide by clicking here.
Fitting inside a recess:
During manufacture a 5mm deduction will be made to the width of the recess measurements provided. This is to ensure the blind can be fitted inside the recess. If you do not wish us to make this allowance then please select blind size and state the exact size of the blind. Do not use fabric size when fitting inside a window recess.
– All roller blinds are produced with extra fabric added to the drop, this is to ensure there is enough material to conceal the metal tube when the blind is fully closed.
– All items are cut to size and will be accurate with working tolerances and variances of +/- 5mm.
Multiple Blinds: if you have roller blinds of varying widths and drops in the same room, please let us know in the comments section when ordering. We can then review the specifications and can look to standardise the barrel diameters if required. This will standardise the look of the blinds, and if motorised, ensure the blinds rise and fall at similar speeds.
Must be used with all continuous chains and fitted 150cm from the floor level.
Chain Break Joiners
Can remove the requirement for a P-Clip retainer and allows chains to finish 60cm above the floor level. Used as standard on all plastic chains.
See ‘Child Safety’ tab for further information.
All of our motorised roller blinds are supplied with Somfy motors who are industry experts in the category.
When ordering a motorised roller blind we need to know:
How is your blind being powered?
How is your blind being controlled?
How if your blind being powered?
Battery control – integrates seamlessly into the window covering of your choice. The battery will only need charging twice a year.
230V power supply
*Home control systems may require 12V or 24V
How is your blind being controlled:
Somfy Zigbee 3.0 – new technology
Somfy Radio Technology (RTS)
*Home Control System wired technology – WT
*Home Control System dry contract technology – DCT
*Your AV company will be able to advise how your blinds will be powered and which control system you require to integrate your blinds with your home control system.
Somfy RTS vs Somfy Zigbee:
Somfy Zigbee 3.0 is the new technology from Somfy that offers more flexibility, versatility and integration than Somfy RTS.
RTS communicates omnidirectional whereas Zigbee offers bi-directional communication which offers some advantages:
The bi-directoinal feedback enables live product status / position of your blinds.
RTS that offers open / closed or open to the pre-set ‘MY’ position, whereas Zigbee offers 99 intermediate opening / closing positions for increased flexibility.
RTS has a fixed range up to 20m, whereas you can keep adding to the Zigbee mesh network for infinite reach.
Zigbee offers faster charging (and on screen information on your battery level) and utilises standard USB-c charges.
Zigbee enables us to offer enhanced after sales support by logging in remotely (with your permission) to the Somfy Professional platform so we can help identify and rectify any issues remotely.
Both Somfy RTS and Somfy Zigbee 3.0 are compatible with the Somfy TaHoma Switch which is a Smart Home Control to centralise and connect home equipment. If integrating your Zigbee powered blind with the Somfy TaHoma Switch you do not need a remote control or wall switch for the set up. This can be done from the TaHoma App. If you have specified a Somfy RTS powered blind a remote control or wall switch will be required for set up.
Wall switches and remote controls are available for both Zigbee and RTS controlled blinds:
This wall switch makes a stylish statement, while offering all the benefits of a single channel remote. This battery-operated solution is easy to install and doesn’t require an electrician.
New timeless look, with interchangeable frames to match any room.
Surface-mount avoids cutting into drywall.
Completely wireless.
Quick and simple installation.
Includes open, close and stop functions, and programmable ‘my’ button.
Located on a wall provides an ideal way to operate motorised products when entering or exiting a room.
This multi channel wall switch can control multiple RTS products individually and as a group. In addition to the 4 individual channels, you can create temporary groups by selecting a combination of the 4 channels. The relevant led’s are pressed to select a temporary group, then the direction or stop button is pressed to operate the blinds. The command signals are sent consecutively to each channel, with the corresponding channel LED blinking during operation.
The three control buttons provide raise, lower and stop control functionality. A favourite position can also be programmed and recalled at the touch of a button (‘my’ button).
Remote Controls
Situo 1 RTS HAND-HELD REMOTES
Situo hand-held remotes offer convenient and simple operation of every type of motorised application. Single channel remotes can operate one individual product or be used to operate a group of motorised products simultaneously.
Examples:
Use the single channel to operate a motorised blind above your sink.
Use the single channel to operate a group of motorised blinds in your dining room. The blinds will raise and lower at the same time.
SITUO 5 RTS MULTI-CHANNEL HAND-HELD REMOTES
Five channel remotes offer more functionality because they offer an additional 5 channels of control. Each channel can still operate one individual product, such as a single motorised blind, or a group of motorised products, such as all the motorised blinds on the first floor. With a total of five channels, you can set the preferences that suit your lifestyle requirements.
Examples:
Use channel one for one motorised blind in your kitchen.
Use channel two for two motorised roman blinds in your living room.
Use channel three for the motorised curtain tracks in your dining room.
Use channel four for the motorised roller blinds in the bedroom.
Use the fifth channel as a master to activate all of your motorised products.
TELIS 1 CHRONIS RTS & TELIS 6 CHRONIS RTS
Telis Chronis RTS combines the functionality of a hand-held control with the convenience of a programmable timer.
Quick Set Feature allows you to easily program or change the automatic operation of motorized applications with a brief button press.
Schedule one open and one close function per day with the automatic mode.
Different scheduled operation available for weekends and weekdays.
Offers a manual mode which disables the timed functions and allows you to use it as a remote anytime.
Comes factory pre-programmed with default time 7:30am OPEN, 8:00pm CLOSE,so if this schedule suits you, you can start using your timer right away.
Can be hand-held or stationary on a wall using the wall mount clip.
Timer features allow you to really make your motorised products work for you!
Examples:
Schedule your bedroom window coverings to open at 7am during the week and at 8:30am on weekends to enjoy a leisurely morning in bed.
Or if your have a flexible schedule, use the two different schedules on days that work best for you.
Utilise the manual mode at any time to simply open or close your blinds, regardless of set schedules, without losing them.
Power Options
The most popular power options are Li ion battery or 230v mains power. We do offer alternative power options and these are most commonly used if you are integrating your blinds with a home control system where you are supplying your windows with a 12v or 24v power supply. An overview of these options is provided below.
Solar
For our battery operated blinds, we also offer the option of adding a solar panel. Although this will not totally eliminate the need to recharge your battery, it will trickle charge the battery to increase the amount of time in between battery charges. Please note, the effectiveness of the solar panel will be dictated by the amount of direct sunlight received. South facing aspects will provide the greatest efficiency.
Other power options – 12v and 24v
TaHoma Switch Home Hub
Somfy TaHoma Switch makes running your home more comfortable, more secure and more economical.
You can operate the TaHoma Switch interface via the internet on a computer, smartphone or tablet, allowing you to have touch control of curtains, blinds, lights, electrical equipment, heating, garage doors and gates etc. regardless of where you are – in the house, on holiday or at work.
Control multiple devices at once with scenario settings and personalise your TaHoma home automation system with smart programming features that ensure your home always works to your schedule. It is also compatible with expert partner systems such as Amazon Alexa, Google Assistant, Philips Hue, Sonos and Velux and over 100 Somfy RTS & io home control products.
Product benefits
Simple The TaHoma® Box radically simplifies control in the house – Easily control your home whether you’re home or away with the TaHoma® interface. – You customise your smart home, at any time, so you stay in control.
Accessible Somfy wireless smart home system, TaHoma compatible with any configuration: newbuild or renovation. – It is easy to install without major structural work, whatever your project.
Upgradable Somfy smart home system, TaHoma, adapts as your needs and your budget change. – You can add new devices to your installation whenever you want.
Home control system integration
Window coverings powered by Somfy can be integrated with total home control systems. Somfy motors are compatible with third-party home automation systems, allowing the user to access and control their motorised window treatments from their home automation remote, touch-screen, wall panel or smartphone.
Braids, Shaped Scallops, Decorative Rods and Pulls
Braid Options:
Cable 5 Colours
Vogue 4 Colours
Antique 4 Colours
Trio 1 Colour
Metallic 3 Colours
Melody 6 Colours
Glits 3 Colours
Crystal 3 Colours
Scallop Options:
Decorative rods and finials:
Wood rod with ball 3 Colours
Metal rod with ball 1 Colour
Metal rod with cylinder 1 Colour
Metal rod with tubular 1 Colour
Metal rod with glitz 1 Colour
Metal rod with twist 2 Colours
Metal rod with Crystal 2 Colours
All Colour Options
Please note, these pulls are for decoration only and are not used to lower the blind.
Wood Acorn 1 Colour
Metal Acorn 2 Colours
Wood Barrel 10 Colours
Perspex 2 Colours
Cylinder 2 Colours
Jute Ball 1 Colour
Pear 5 Colours
Crystal 1 Colour
All Colour Options
Bottom Bar Options for Roller Blinds: Finding the Perfect Finish
Fabric Covered Bottom Bar
Round Bottom Bar
Gemini Bottom Bar
We offer a variety of bottom bar options to complement your roller blinds and enhance their functionality. Watch our YouTube video above for an overview of the options available.
Fabric Pocket with Weight:
This is a popular option. It features a pocket at the bottom of the blind that holds a weighted bar. This provides stability and helps the blind hang straight. Light filtering fabrics will have a stitched pocket and blackout fabrics will have a bonded pocket (to eliminate light ingress through the stitching). Benefits: Simple and effective at keeping the blind taut.
Fabric Covered Bottom Bar:
This option adds a decorative touch with an oval-shaped bar fully covered in the same fabric as the blind. Benefits: Creates a cohesive look, ideal for those who want the bottom bar to blend seamlessly with the blind, whilst creating a very subtle design feature at the bottom of the blind. This is our standard option.
Gemini Bottom Bar:
This metal bottom bar option is available in a choice of five colour options (white, black, silver, anthracite grey and chrome) and you can specify whether you would like the angled or smooth side visible. Benefits: Provides versatility, allowing you to create a more distinct design feature at the bottom of your blind by either selecting a complementary or contrasting colour bottom bar.
Round Bottom Bar:
This classic option utilises a round metal bar for a stylish look. Benefits: Offers a clean and timeless design, perfect for traditional or contemporary settings. Available in white and silver.
Choosing the right bottom bar depends on your desired aesthetics and functionality. For a simple and functional option, the fabric pocket or fabric covered bottom bars are a great choice. If you prefer a more decorative look, consider the coloured Gemini bar or the round bar for a classic style.
The image below shows the fabric covered bottom bar which is the standard option.
Capital Fascia Bottom Bars
If you have ordered a Capital Fascia to conceal your blind, you can order a co-ordinating bottom bar available in 4 finishes; white, black, anthracite grey and brushed silver.
CHILD SAFETY
For chain operated blinds, the blind will be supplied with either chain break joiners attached to the operating chain, or a P Clip chain retainer that will need to be fitted to the wall.
Chain Break Joiners
Two chain break joiners are connected to the operating chain 200mm apart. This ensures that at least one of them will be in the vertical position ensuring they perform as required. If excessive weight is applied within the loop a chain break joiner will break apart. If a joiner comes apart then it will need to be re-connected. To re-connect, check the joiner for damage. If undamaged, re-connect the chain by inserting the last ball on the end of the chain into the larger hole of the joiner and push it into place. A blind with a chain break joiner can be fitted with the chain finishing 60cm above the ground.
P-Clip Chain Retainer
Alternatively a P-Clip Chain Retainer can be supplied. The bottom of the chain must then be fitted at least 150cm from the floor. The P-Clip must then be secured on the wall.
Please request any fabric samples by completing our contact form:
Once an order has been placed and processed our customer service team will be in touch via email to advise a dispatch date and send a tracking link if available. The lead-time information on all products is advised in the product description or product specification tabs on the product pages. If you’d like us to check stock or advise delivery timings for a specific product please give us a call on 01590 615775 and a member of the team will be delighted to help.
Whilst we will endeavour to fulfil our delivery promises once the goods leave our warehouse we do rely on 3rd parties to fulfil their obligations. We therefore recommend that a fitter or decorator isn’t booked until the goods are safely in your hands and have been checked for damage and any missing items. We cannot be held responsible for any fitter or decorator cancellations.
Please refer to our Returns page for information on returning a product.
Prior to ordering!
We hope that you are delighted with your purchase. To reduce the likelihood of having to return a product, we do recommend paint sample pots, wallpaper and fabric swatches are ordered prior to ordering the full sized items. We can also send out ring samples, colour toggles or off cuts of curtain poles / tracks to ensure the colour is right before you commit to order. Please get in touch if we can offer any assistance. Please email sales@thehomeofinteriors.co.uk or call us on 01590 615775 and a member of the team will be delighted to help.
