Silent Gliss 4960 Motorised Roller Blind – Medium Weight Blinds

View description | View delivery options

Select Fabric

Silent Gliss 4960 Motorised Roller Blind – Medium Weight Blinds

  • Medium duty motorised roller blind system for contract and residential applications
  • Fixed switch or optional radio remote control
  • The system can be used as a single or connected double system with one motor
  • Progressive limit switch unit for easy setting and consistent positioning
  • Easy ceiling, wall or recess fix
  • Optional metal design brackets
  • Optional continuous installation profile with click in brackets for fast fixing on site
  • Side-by-side version with centre support bracket and minimal light gap (double motors)
  • Connected Double version with centre support bracket and minimal light gap (single motor)
  • Side guide option available
  • Choice of bottom bar designs
  • Quiet and fast mains powered motor
  • Optional 24V DC motor available
  • Can be combined with Radio Remote Control System Silent Gliss 9940/0450
  • Optional Smart motor to allow integration and control by most major home control systems

It has easy loading into snap brackets and bracket covers are available for neater appearance outside recess.

Variable fixing possibilities to wall, ceiling or recess are available. The blind can also be supplied with an optional continuous headrail 10534, and fixed with clamps at any point along the blind.  This is useful where fixing is not possible at the end of the blinds  (email us your requirements if you would like the continuous headrail).

The blind can be used as a double system where two blinds are mounted side by side (perfect for really wide windows). The double version uses a slimline centre support bracket to minimise the light gap.   This side by side system does connect the blinds, so only a single motor is required.

All blinds 250cm and over are supplied as a double system.  The double system can also be specified for smaller blinds and this will be offered as an option during checkout.

To order a side by side blind (double motors), purchase two of the same size blind ½ of the total width required and add a note in the comments section. We will supply with double blind fittings and the additional 10632 intermediate cover.

This blind is made to measure and supplied ready assembled.

 

To view the technical catalogue for the 4960 roller blind please click here.

For the Silent Gliss fitting sheet for the 4960 roller blind please click here.

More more information on the full range of Silent Gliss roller blinds please take a look at the full product brochure here.

Leadtime: 10-14 working days

Email: sales@thehomeofinteriors.co.uk

Call us on 01590 615775

Follow us on YouTube

Leadtime: 7-10 working days

For the Silent Gliss fitting sheet for the 4960 roller blind please click here.

4960 with SG Series 20 motors
Silent Gliss Electrically Operated Roller Blind System 4960. Supplied made to measure and complete comprising anodised aluminium barrel with integral 230v 50 Hz powered motor. Motor left / right side. Includes 10542/10543 bracket set for wall or ceiling fixing. White bracket covers 10574/10575 supplied as standard. Aluminium bottom weight bar 4221 as standard in white (other shape options available). Operation by mains switch (not supplied) or mains switching by third party control system or / SG 0450 remote control system components (supplied at additional cost)

4960 with SG Series 40 motors
Silent Gliss Electrically Operated Roller Blind System 4960. Supplied made to measure and complete comprising anodised aluminium barrel with integral 240-100v 50/60 Hz mains powered motor. Motor left / right side . Includes 10542/10543 bracket set for wall or ceiling fixing. White bracket covers 10574/10575 supplied as standard. Aluminium bottom weight bar 4221 as standard in white (other shape options available). Operation by dry contact switching either from fixed switch (not supplied) or third party control system and /or Silent Gliss 9940 radio control system via integrated receiver. (9940 control components supplied at additional cost).  NOTE: 24v Series 40 Motors are not supplied with power supplies (transformers) as standard. They must be ordered separately.

4960 with ‘Smart by Silent Gliss’ motors
Silent Gliss Electrically Operated Roller Blind System 4960. Supplied made to measure and complete comprising anodised aluminium barrel with integral 24V DC powered motor: Motor left / right side. Operation via Silent Gliss Smart Gateway and associated components in conjunction with compatible third party control systems. Includes 10542/10543 bracket set for wall / ceiling fixing. White bracket covers 10574/10575 supplied as standard. Aluminium bottom weight bar 4221 as standard in white (other shape options available).

Use these links to shop control options:

9940 Remote Options

9940 Wall Switch Options

Silent Gliss 9940 Wall Switches

0450 Remote Options

Silent Gliss 0450 remotes

0450 Wall Switch Options

Silent Gliss 0450 wall switches

Standard Bracket

Metal Design Bracket (optional)

Test Leads
Reasons for ordering a test lead:

If hard wiring is not already in place, a test lead allows you to set up, test and commission the product without the electrician being there to hard wire the product into the mains – as test leads are supplied with a 3 pin plug.

Test leads are also a useful tool if you need to reset the limits (stopping positions) and you are not using Silent Gliss radio controls. In most cases, limits are factory set, but the factory limits are set based on assumptions and tweaking may be needed on site.

Examples of where a test lead would avoid problems:

Roman: Factory limits are set, however these limits often need to be reset, as the blind is not attached when the head rail is made. The weight of fabric can affect the limits. If there is no hard wiring in place, you will need a test lead and 3 pin plug socket available to supply power to the headrail.

Electric track: The limits on electric tracks can usually be set using wireless controls or by using the buttons on the motor. If there is no hard wiring in place, you will need a test lead and 3 pin plug socket available to supply power to the headrail.

Roller: If the fabric is not in the correct position when the blind is mounted to the brackets, you will need to reset the limits. Operating the blind without reseting the limits could potentially causing damage to the fabric, if limit is set to high. If there is no hard wiring in place, you will need a test lead and 3 pin plug socket available to supply power to the headrail.

We offer free delivery on all Little Greene Paint and Wallpaper orders.

For other purchases, we offer free delivery on all orders over £97.50.  There is a £7.95 delivery charge on orders under this value.  Please refer to our delivery Ts and Cs for a full breakdown of our delivery charges.

LEADTIMES:

The leadtimes vary depending on the product ordered.  Please refer to the Leadtime on the product specification tab for information on the particular product you are looking at.  If the product is available on  a ’Next working day’ service this applies to all orders received up to 6pm.  Please note there is a 4pm cut off for any Jones products.  Any orders placed over the weekend will be dispatched on the Monday for delivery to you on the Tuesday.

Please note the next working day service is subject to stock availability.  If there are any stock shortages we will notify you immediately and work with you to find a suitable solution to meet your requirements. If you don’t want delivery the next day please call us on 01590 615775 to place your order over the phone and we and we can set up delivery for your nominated day.

Whilst we will endeavour to fulfil our delivery promises once the goods leave our warehouse we do rely on 3rd parties to fulfil their obligations.  We therefore recommend that a fitter isn’t booked until the goods are safely in your hands and have been checked for damage and any missing items.  We cannot be held responsible for any fitter cancellations.

We hope that you are delighted with your purchase.  To reduce the likelihood of having to return a product, we do recommend paint sample pots, wallpaper and fabric swatches are ordered prior to ordering the full sized items.  We can also send out ring samples, colour toggles or off cuts of curtain poles / tracks to ensure the colour is right before you commit to order.  Please email sales@thehomeofinteriors.co.uk to request a sample.  Please note made to order / measure / cut to size curtain poles and tracks cannot be returned or exchanged unless faulty.  Please also note that Little Greene paint products are bespoke and therefore tinted to order. Unfortunately we are therefore unable to accept any returns on Little Greene paint orders.

For any standard products not listed above, in the event that you would like to return your goods we accept returns within 30 days of delivery.

There is an £20 collection charge to return curtain pole or curtain track orders. We appreciate this is a lot of money but this is what our couriers charge us. Curtain poles and tracks are classified as ‘oversized’ items and so they incur a premium for handling long parcels.

If you would like to return curtain pole accessories or curtain track spare parts these can be returned by Royal Mail or a carrier of your choice.  Please return smaller items to: The Home Of Interiors, The Design Hub, 41 Brookley Road, Brockenhurst, Hampshire, SO42 7RB.

To return and obtain a refund (excluding delivery costs) please email us at sales@thehomeofinteriors.co.uk or give us a call us on 01590 615775. We will then contact you to organise the collection / return. Failure to notify us may result in no refund or an additional cost to forward your returned item/s to the correct address.

Any products you return will be at your own cost and the goods must be in the same condition which they were received.  The goods must be in their original packaging.  The goods are your responsibility until they reach us so please make sure any returned items are very well packaged to avoid damage while in transit. Please ensure the returns reference, which will have been emailed to you, is clearly marked on the outside of the parcel.  We recommend you use the outer packaging the goods were delivered in.

If on receipt of the goods we inspect them and conclude that they are not in the same condition they were sent out in we will not be able to provide a refund. We will notify you if this is the case.

The refund, minus the original delivery charge and minus the collection charge, is usually actioned within a week of the items being returned but it can take up to 30 days. The refund will be made back to the account that the original purchase was made from.